What kind of oil goes in a Polaris Ranger?

What kind of oil goes in a Polaris Ranger?

2 Quarts of Polaris PS-4 Full Synthetic 4-Cycle Engine Oil.

What weight is Polaris PS-4 oil?

5W-50
POLARIS EXCLUSIVE CLEAN ENGINGE ADDITIVE SYSTEM: Significantly reduces engine deposits to help maintain peak power and performance. OUTSTANDING PROTECTION AND PROVEN PERFORMANCE: PS-4’s unique wide 5W-50 viscosity range provides critical engine in all seasons.

What kind of oil does a Polaris Ranger 500 take?

The recommended oil is Polaris PS-4 Full Synthetic, which is part number 2876245 for 1 gallon and part number 2876244 for 1 quart. Polaris Oil Change Kits come with the correct amount of oil for your vehicle. The oil change kit for a RANGER 500 is part number 2202166.

What oil does a Polaris Ranger 800 take?

Remove the dipstick and fill the sump with two quarts (1.9 L) of the recommended oil. Polaris PS-4 5W-50 4-Cycle Oil is part number 2876245 for 1 gallon (3.78 L) and part number 2876244 for 1 quart (946 ml). The Full Synthetic Oil Change kit is part number 2202166. 15.

Can you use 5W30 in Polaris Ranger?

Can You Use 5w30 In Polaris Ranger? Synthetic motor oils can be used in a 5W30 motor oil.

What is the difference between 5W-50 and 10W 50 oil?

Both are 50 weight oils. The 5W and 10W pertain to how much protection your motor receives at very low temperatures. The 5W will provide more lubrication at start up vs. the 10W IF and I mean IF you are running it below 0C.

Can you use 5W40 in Polaris Ranger?

You can run Rotella T6 5W40, or a full syn 5W50, It’s fairly common oil. I have run T6 in my Polaris since first oil change, and have used Fram Ultra filters too. Not one in issue in 3,800+ miles.

Can I use 5W 30 in my ATV?

Registered. Mobile 1 0-W40 is a full synthetic oil so it is fine for the ATV.

Can 5w40 be used instead of 5W50?

Conclusion. The 5w50 oil has a higher viscosity than 5w40, which means it’s thicker and can perform better under high-load. However, this also means that it’s more resistant to shear, meaning that the engine oil won’t thin out as fast as a lighter weight oil at high temperatures or in higher load situations.

Can I use 10W40 instead of 5W50?

Can I Use 10w40 Instead Of 5w40? The synthetic engine will be fine as long as it is fully synthetic. 5W – 40 is better for colder conditions, 10W is thicker to start, so it does not get to places around the engine as quickly as 5W-40, but it all depends on the temperature.