When crossing train tracks What should you not do?
Never try to beat a train to a crossing or cross the tracks in front of a train. Trains cannot stop quickly and cannot swerve to avoid hitting you. Stop no closer than five metres from the nearest rail of the railway track. Look both ways along the railway track for an oncoming train.
What is uncontrolled railroad crossing?
Railroads that have warning signs, red lights, and gates are called controlled railroad crossings. In some rural areas, uncontrolled railroad crossings are found with no signals, signs, or gates. Be extra alert when crossing an uncontrolled railway crossing. Remember that the train always has the right-of-way.
What is the speed limit when crossing an uncontrolled railroad crossing?
20 mph. When you are within 100 feet of an uncontrolled railroad crossing where you cannot see the tracks for 400 feet in both directions, the speed limit is 15 mph.
What triggers railroad crossing gates?
When a westbound train approaches and enters the east approach circuit, the train shunts the rails (shorts them out) and this triggers a relay in the signal control box. The relay then triggers the crossing signal to activate.
How should you proceed after a train clears the crossing when there are flashing lights?
After a train clears a crossing that has flashing signals, After a train clears a crossing that has flashing signals, drivers may proceed only after the lights have stopped flashing and no second train is coming on another track.
What is the difference between an active and passive railroad crossing?
An active-railroad crossing are controlled with electric signals. A gate will usually close, lights flash and a sound is made. A passive railroad crossing do not have any lights, sounds, or gates.
Why are stop signs at railroad crossings?
This sign tells us to slow down and be prepared to stop if a train is approaching. There is a no passing zone within 100 feet of the approach to a railroad crossing. A stop line may be painted on paved roads in advance of the intersection and identifies the safe place to stop, if a train is approaching.
Is a railroad sign a warning sign?
The railroad crossing sign is a warning sign. Railroad crossing signs are designed to alert drivers of railroad tracks ahead. Drivers must be aware of any approaching trains from both directions and be prepared to stop, if necessary.
Can you cross railroad tracks when lights are flashing?
When you approach a railroad crossing and you see flashing red lights, this means that either a train is on the tracks or a train is approaching. In either instance, you should stop. Not only is it unlawful to cross the tracks while the red light is flashing, it also could prove to be fatal.
When approaching a railroad crossing you should?
Always yield to flashing lights, whistles, closing gates, crossbucks or stop signs. Never shift gears on the railroad crossing, downshift before you reach it. If you must stop, keep a distance of 15 to 50 feet from the tracks.
What is the fine for going around a railroad crossing?
If in doubt, it is wise to err on the side of caution and always “stop, look, and listen” before crossing any railroad tracks. The fine for failing to stop at a railroad under CVC § 22452 is $490 and one point against your license.
Is it illegal to cross railroad tracks when lights are flashing?
In every state, it’s illegal for you to go around a lowered crossing gate or to ignore signs or flashing lights posted at a railroad crossing. Trains always have the right-of-way, and for good reason: Trains can’t swerve, stop quickly, or change direction to avert collisions.
What does the color orange mean do drivers?
Orange: You’ll see orange traffic signs anywhere there’s construction occurring. This color is used to alert you to possible dangers ahead due to construction and maintenance projects. Reduce your speed and scan for workers who may be directing traffic. Brown: This color is used for parks and recreation signs.
When approaching a railroad crossing with flashing lights you must quizlet?
Flashing red lights, lowered crossing gates and/or a bell at a railroad crossing indicate that you must stop, at least 15 feet (5 m) from the tracks. Do not go across the tracks until the lights and bell have stopped and the crossing gates are completely up.
When approaching a railroad crossing without mechanical gates you should?
What should you do when approaching a railroad crossing without mechanical gates or lights? You must yield, slow down, be prepared to stop, check if the tracks are completely cleared, and go on.
Which capability is most important to driving?
Study for Driving from the Ch. 1 Test A sheet
| Question | Answer |
|---|---|
| Which capability is most important to safe driving? a. operating the vehicle’s controls b. good hearing c. decision-making d. sense of feel | c. decision-making |
| Which IPDE step do you use when you look ahead and locate a hazard? | identify |
What is the greatest problem most beginning drivers face?
Study for Driving from the Ch. 1 Test B sheet
| Question | Answer |
|---|---|
| Driving is a social task because | drivers must interact with each other |
| The greatest problem most beginning drivers face is their | inability to make decisions |
| What IPDE step do you use when you apply the brakes to stop? | execute |
What vehicles must stop at all railroad crossings quizlet?
all school buses and vehicles carrying passengers for hire, and all vehicles required to b placarded for hazardous materials, must stop within 15 to 50ft of railroad tracks before crossing. if a police officer or highway traffic signals directs highway traffic to proceed, you don’t have to stop.
When arriving at an uncontrolled intersection where there are no stop signs or signal lights you must?
At an intersection without STOP or YIELD signs (uncontrolled intersection), slow down and prepare to stop. Yield to vehicles already in the intersection or entering it in front of you. Always yield to the car that arrived first.
What vehicles must stop at all railroad crossings?
The following vehicles are required to stop at all railroad crossings: motor vehicles carrying passengers for hire; commercial and school buses; vehicles carrying explosive substances or flammable liquids; and commercial vehicles carrying hazardous materials.
What does a yellow railroad sign mean?
Railroad crossing ahead
When your right wheels run onto a soft shoulder What is the best way to get back on the highway?
Apply the brakes firmly and stop completely. Explanation : If your wheels drift off the pavement onto the road shoulder, do not yank the steering wheel back. Ease your foot off the gas pedal, and brake gently. When it has slowed down, check for traffic behind you, then steer gently back onto the pavement.
What is the railroad crossing sign called?
A crossbuck is a traffic sign used to indicate a level railway crossing. It is composed of two slats of wood or metal of equal length, fastened together on a pole in a saltire formation (resembling the letter X).
When you approach a railroad crossing without flashing warning signals or crossing gates you should?
Always be prepared to yield to any oncoming trains before crossing railroad tracks, particularly if there are no lights or gates controlling the crossing. Never start to cross the tracks until there is room for your entire vehicle on the other side of the tracks.
What should a driver do if the front right wheel of a vehicle runs off the pavement?
If the front right wheel of a vehicle runs off the pavement, a driver should ease off the accelerator, allow the vehicle to slow down, and gently steer back onto the pavement.