What size is a 78 record?
78s come in a variety of sizes, the most common being 10 inch (25 cm) and 12 inch (30 cm) diameter, and these were originally sold in either paper or card covers, generally with a circular cutout allowing the record label to be seen.
Can you play 7-inch records on a normal record player?
All record players do not play every single size of vinyl record. All record players will play the two most common sizes of vinyl record, those being 12-inch and 7-inch, but it is far less likely they will be able to play a 10-inch record.
What are the sizes of vinyl records?
Vinyl records also come in three standard diameters: 7-inch, 10-inch and 12-inch. The larger the diameter, the longer the groove can be and the greater the possible playing times, dependent upon rotational speed. (The actual playing time is a ratio between speed and the length of the grooves.)
What is a 16 record?
Have you ever heard of a long forgotten vinyl format, the 16 2/3 RPM record? They were half the speed of the 33 1/3 RPM albums that were the traditional standard for recorded music.
What size records do victrolas play?
ANSWER: Victors and Victrolas will play any laterally-cut 78 RPM record. This would include most flat shellac records, with the exception of some early Edison and Pathe discs, which used a vertical cutting method.
What is a 17 cm record?
Seven inches (17 cm) A seven inches, or 7″ in short, is a vinyl record measuring 7 inches in diameter, i.e. 17.78 centimetres. This format is usually used for the singles and more specifically for the 45 rpm.
What the difference between 7 and 12 vinyl?
They are played at either 331⁄3 or 45 rpm . The conventional 7‐inch single usually holds three or four minutes of music at full volume. The 12‐inch LP sacrifices volume for extended playing time.
What’s the biggest vinyl record size?
12-inch
The largest record size is a 12-inch album. Each side can generally store up to 22 minutes of music.
Why do 45s have big holes?
A larger hole allowed the sudden rotational forces to be distributed over a greater distance (π x 1.5; about 4.712 inches), reducing wear and allowing the hole to stay rounder longer. This was especially important for the jukebox industry. In the 1930s, ’40s, and ’50s, jukeboxes were big, big business.