What is the difference between 3528 and 5050 led?
The 3528 typically contains a single 20 mA LED chip (approximately 0.06 Watts) and a 5050 typically contains three 20 mA LED chips (approximately 0.2 Watts). Therefore, a single 5050 LED package has the capacity of 3x 3528 LEDs.
What does SMD 5050 mean?
Simply put, these LED chips are called SMD 5050 because the dimensions of the chips are 5.0mm x 5.0mm. They have 3 LED diodes in one housing (sometimes called tri-chips), and are a lot brighter than individual 3528 LED chips.
What does SMD 3528 mean?
SMD 3528. SMD 3528 Chips are perhaps the most common of all LED light strip chips. They are the least bright and least power-intensive of the three chips we use at HitLights, and are most commonly used for accent lighting, such as above kitchen cabinets and around the crown molding below the ceiling.
What is 3528 LED strip?
The 3528 LED is a smaller SMD chip than those used on the 5050 LED strip SMD, its dimensions are 3.5mm x 2.8mm. The 3528 LED chip is mostly used in a LED tape of 60 LEDs per metre pulling 4.8w and at 12v (commonly known as 4.8w p/m or 5w p/m LED tape).
What is LED 3528?
3528 LEDs are RGB LED strip China products that have a chip surface area of 9.8mm squared, consumes about 30mA of power, and has a lumen flux of about 8 lumens.
What does 5050 mean in LED strip lights?
This code is less complicated than it looks – it simply indicates the size of the LED chip. For example, the dimensions of SMDs on 5050 LED strip lights are 5.0mm x 5.0mm.
Are SMD 5050 individually addressable?
the Individually Addressable RGB Strip Lights comes with 3 pin JST-SM Connectors, easy to connect to Pixel LED Controllers to achieve thousands of amazing lighting effects, like curtain-up, flow water, raindrop, jump flash and other hundreds of lighting effects.
What is the size of SMD 3528 LED light strip?
Take SMD 3528 for example, they are 3.5mm wide and 2.8mm long. Note that size is not proportional to output or performance, and it is not the only difference between LED chip types. SMD 3528 Chips are perhaps the most common of all LED light strip chips.
What is the difference between SMD 3528 and 5050 chips?
SMD 5050 Chips are just barely behind the 3528 chips in popularity. These chips are 5.0mm x 5.0mm. 5050 chips are typically 3 times as bright as 3528 chips.
What does SMD mean on LED light strips?
That means this is an LED Chip (device) mounted directly to a light strip, without using wires. This surface mounting technology is indeed what makes LED Light Strips possible. The numbers after the SMD simply refer to the physical size of the LED Chip. Take SMD 3528 for example, they are 3.5mm wide and 2.8mm long.
What is a 5050 LED strip used for?
Because they’re brighter, strips with 5050 chips are typically used for what we call ‘task lighting’, and commonly used underneath kitchen cabinets where that light will help you see what you’re working on. 5050 strips are often also available in color changing styles, meaning that you can select any color you want with a remote or controller.