What is control station in Vnx?

Posted on by Emilia Duggan

What is control station in Vnx?

Control Station – CS – Normally preceded by “Primary” or “Secondary” as there are at least 1, but most often 2 control stations per VNX system. It is the job of the control station to handle management of the File or Unified components in a VNX system. Block only VNX arrays do not utilize a control station.

How do I upgrade EMC VNX?

Upgrade the VNX OE for File software before upgrading the VNX OE for Block software Start Unisphere Service Manager.

  1. Log in to the storage system to be updated using the IP address of one of the SPs and administrator credentials.
  2. After you have run through the Prepare wizard then select the Install Software step.

How do I access EMC VNX?

You can go via: the SP’s management port: http://:9519; the SP’s service port: https://128.221.1.250:9519 (SP A) or https://128.221.1.251:9519 (SP B); and. the SP’s serial port: https://192.168.1.1:9519 (this assumes you’re connected via serial already – more on that below).

What is Vnx launcher?

What is a VNX Launcher? VNX Launcher is a Unisphere Client for Windows, it is a host-based version of the Unisphere management tool. This version of the Unisphere client includes a browser and self-contained JRE, and does not require Java to be installed.

What is Unisphere Service Manager?

The Unisphere Service Manager (USM) is a Java-based desktop application that helps you upgrade, install, and maintain your storage-system hardware and software as well as provide contact and storage-system information to your service provider.

How do I upgrade vnxe3200?

Procedure

  1. Check for software updates on the Support website.
  2. Download the new software to a local machine on your network.
  3. Upload the new software from your local machine to your storage array.
  4. Install the file on your storage array.

How do I log into EMC storage?

Log in with the EMC Unisphere tool to access EMC storage. Select a storage system. Go to Storage >Storage Configuration >Storage Pools.

What is Unisphere EMC?

Unisphere is a web-based solution that provides an easy-to- use interface for storage management actions, including creating storage resources, configuring and scheduling protection for stored data, and using advanced features like replication and host I/O limits.

How use Unisphere command line?

Instructions

  1. Log into Unisphere.
  2. Select the System tab.
  3. Go to Control Station CLI at the bottom right pane.
  4. Select Run Command right below that.
  5. The command page opens for entering commands. Article Properties. Affected Product.