How do I connect my iPad to my BT hub?

How do I connect my iPad to my BT hub?

How do I connect an iPad to my BT Home Hub?

1. From the iPad home screen, select Settings.
2. Select Wi-Fi from the left menu and make sure the Wi-Fi switch is set to On.
3. Select your Hub from the list.
4. Enter your wireless key and select Join.
5. After a few seconds you should see a tick next to your Hub.

How do I access my BT Home Hub 4 settings?

How to open the Hub Manager

1. Open a new web browser.
2. Type 192.168.1.254 into the address bar.
3. This will open the Hub Manager.
4. If you want to make any changes to the hub settings, you’ll need the admin password. You’ll find it on the back of the Hub if you haven’t updated it.

How do I add a device to my BT Home Hub?

Connect devices

1. Go to Settings – Network & internet.
2. Turn on wi-fi.
3. Select your hub from the list of networks.
4. Enter your password and tap ‘Connect. ‘
5. Wait for your device to connect.

How do I manage devices on my BT hub?

How do I use BT access controls (Wi-Fi Controls)?

1. Open a new web browser on your connected device and type 192.168.1.254 into the address bar.
2. Click Advanced Settings.
3. Click BT access control.
4. Enter the admin password.
5. Select the device you want to apply access controls to and click Set.
6. Choose the start time and click Set.

How many devices can connect to BT Smart Hub?

The total maximum number of IP addresses in use including the Smart Hub and Discs is 45, but that has never happened, but 30-35 is highly likely.

Why can I not connect to my BT Hub?

Restart your Hub Many connections problems can be resolved by turning your BT Hub off and on. Press the Power button on the back until all the lights go off and wait for 5 minutes. Press the Power button again until all the lights come back on. It may take a few minutes for the lights to settle.

How do I use WPS on BT Smart Hub?

Press the Wireless WPS button on the rear of your Hub for more than 3 seconds but for less than 15 seconds. Your computer will now automatically establish a wireless connection with your Hub 3. The Wireless light on the Hub will slowly flash orange then steady blue when the connection is successful.

Should I turn off BT smart setup?

Do I have to complete Smart Setup every time I connect a new device to my Hub? It’s best that you complete Smart Setup to ensure that you get the most out of your BT Broadband features and services. If you want to exit, you’ll need to do this on the login step of Smart Setup. You can’t exit the first few steps.