How do you charge NiteRider Lumina?
1. Plug one micro USB side of the USB charging cable into the Lumina charging port and the other into your computer. 2. The LED charging indicator on the Lumina will remain red until the battery is fully charged; once charged it will then switch to blue.
How do you lock a Niterider light?
Always put the light into lock mode during transport of the headlamp. To put the headlamp in lock mode, press and hold the power button for several seconds until the headlamp turns off and continue holding the power button down through flash mode until the power button turns or flashes red.
Are flashing bike lights illegal?
Flashing lights The 2005 RVLR amendment meant that it was now legal to have a flashing light on a pedal cycle, provided it flashed between 60 and 240 times per minute (1 – 4Hz). The amendment also meant that a flashing light was approved, meaning no other light was needed in that position.
What is the Niterider Lumina™ micro 650?
Big things come in small packages and the NiteRider® Lumina™ Micro 650 is the proof. The Lumina™ Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride.
Are the Niterider micro 650/sabre 80 good for commuting?
Practical and highly visible, the NiteRider Micro 650/Sabre 80 have you covered if you commute on unlit roads If you are looking for a set of higher powered commuting lights with the ability to leave mounts on the bike then NiteRider’s Micro 650 and Sabre 80 are a very good pairing.
How do I use the Lumina micro 650 in lock mode?
• Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 8-10 seconds to lock out operation of light. The Lumina™ Micro 650 is USB Rechargeable.
How long does it take to charge the Lumina micro 650?
The Lumina™ Micro 650 is USB Rechargeable. Another feature of note on the 650, Intellicharge™, which reduces your charge time in half—giving you more time riding and less time waiting. Charge time is 1:45 hours, when plugged into a power source outputting over 500 mA and 3:30 hours when below 500 mA.