What size fuel line does Stihl use?
The Stihl fuel filters fit pretty well in the 3/16″ ID tubing. You can make a fuel line for less than $1 and once you have an assortment of grommets, a couple lengths of tygon and the fittings you can make whatever fuel line you need.
Where is the fuel filter located on a Stihl weedeater?
The gas filter is inside the fuel tank on the end of the incoming fuel line. When your Stihl becomes difficult to start or often stalls even with a full tank of fuel, chances are the fuel filter is dirty.
Is there a fuel filter on a Stihl weedeater?
The Stihl gas trimmer uses a filter to removes contaminants from the fuel before it enters the carburetor. The gas filter is inside the fuel tank on the end of the incoming fuel line. When your Stihl becomes difficult to start or often stalls even with a full tank of fuel, chances are the fuel filter is dirty.
Is there an instruction manual for the Stihl HL 100?
STIHL HL 100 Owners Instruction Manual STIHL HL 100 WARNING Read Instruction Manual thoroughly before use and follow all safety precautions – improper use can cause serious or fatal injury. ADVERTENCIA
What kind of fuel do you use in a STIHL power tool?
Fuel Your STIHL power tool uses an oil- gasoline mixture for fuel (see the chapter on “Fuel” of your instruction manual). WARNING Fueling Instructions WARNING To reduce the risk of serious injury from burns, never attempt to refuel the unit until it has been completely removed from the operator.
Is the HL 100 instruction manual protected by copyright?
HL 100, HL 100 K English 1 {This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic systems. Contents Allow only persons who fully understand this manual to operate your hedge cutter.
What is HLHL 100 disease?
HL 100, HL 100 K English 4 disease. In order to reduce the risk of whitefinger disease and carpal tunnel syndrome, please note the following: Most STIHL power tools are available with an anti-vibration (“AV”) system designed to reduce the transmission of vibrations created by the machine to the operator’s hands.