How do I scan from my Canon MX490 to my computer?

Posted on by Emilia Duggan

How do I scan from my Canon MX490 to my computer?

Scanning Documents

  1. Place the item on the platen. Placing Items (When Scanning from a Computer)
  2. Start IJ Scan Utility.
  3. Click Settings…, then set the paper size, resolution, etc. in the Settings (Document Scan) dialog as required. When setting is completed, click OK.
  4. Click Document. Scanning starts.

How do I troubleshoot my Canon Pixma printer?

There can be many reasons for a Canon printer to go bad, some of them are major ones:

  1. Check the printer error lights.
  2. Clear your Canon printer queue.
  3. Check printer connection.
  4. Check paper jams.
  5. Check that the paper is installed correctly.
  6. Check ink cartridge.
  7. Update your printer drivers and software.

Why is my computer not connecting to my Canon printer?

Simply turn the printer off with the power button on the printer. Once turned off, disconnect the printer’s power cord from the back of the printer. Wait approximately 30 seconds before you reconnect it. Once reconnected, use the printer’s power button to turn the printer back on.

Why is my computer not recognizing my Canon printer?

The printer may not be recognized if you install the printer driver with the printer turned ON. Always turn OFF the power before installing. 2. When the following screen appears, connect the computer and the printer with a USB cable, and turn ON the printer.

How to connect Canon mx490 to laptop?

to the Computer Using a. USB. Cable. Connect the machine and the computer using a USB cable as the illustration below. The USB port is located on the rear of the machine. Page top. MX490 series. Overview of the Machine. Information about Network Connection.

How to change ink in a canon mx490?

Wait for the ink cartridge holder to stop. Don’t try to move it forcibly.

  • The inside of the machine may be stained with ink.
  • Don’t touch the metallic parts or other parts inside the machine.
  • If the paper output cover is left open for more than 10 minutes,the ink cartridge holder may move and the alarm lamp will flash.

    • How to print double sided on canon mx490?

    Follow steps 1-3 above to open the Printer Preferences dialogue box.

  • Check the Duplex Printing check box and uncheck the Automatic check box on the Page Setup tab.
  • Select the Page Layout.
  • The printer automatically selects the best Staple Side.
  • If needed,chose Specify Margin to set the margin width,then and select OK.
  • Select OK on the Page Setup tab.

    • How to connect a canon Pixma mx490 printer to WiFi?

    – You need to turn on the router and make sure that it has an active internet connection. – Alongside the Canon PIXMA MX490 Printer setup is powered on. – In the Control panel, Click on the Setup button. – Then click on the Wireless LAN Setup. – Now your printer searches for the network of the router. – You can tap & hold the WPS button on the router.