What is ASTM D2513?
ASTM D2513 : Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings.
What is the difference between pe2406 and PE2708?
Also, the material designation “PE-2406” was changed to”PE-2708” because PE-2406 has been eliminated and replaced with the higher performing material. improved resistance to slow crack growth, the principal cause of failure in polyethylene pipe.
What is high density polyethylene pipe used for?
HDPE pipe is a type of flexible plastic pipe used for fluid and gas transfer and is often used to replace ageing concrete or steel mains pipelines. Made from the thermoplastic HDPE (high-density polyethylene), its high level of impermeability and strong molecular bond make it suitable for high pressure pipelines.
What is PE2708?
PolyTough1 (PE2708) is a unique high performance medium density gas distribution pipe manufactured from Dow® ContinuumTM DGDA 2420 bimodal resin. PolyTough1 provides outstanding resistance to slow crack growth (SCG) and rapid crack propagation (RCP) which provides for a safer gas distribution system.
What is PE2406?
PE2406 GAS PRESSURE PIPE (IPS) Gas Pipes. Duct & Innerduct.
What is ASTM F714?
ASTM F714, Revision 21A, May 1, 2021 – Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter. This specification covers polyethylene (PE) pipe made in three standard outside diameter sizing systems, based on outside diameters of DIPS 3, IPS 4, Metric 90 mm and larger.
What is CTS gas pipe?
CTS or Copper Tube Size is gas line made to control the outside dimensions (OD) to be the same as copper tube piping. That means that 1″ CTS pipe has an OD of 1 1/8″ and 1 1/4 CTS pipe has an OD of 1 3/8″.
Is polyethylene pipe safe for drinking water?
In use in potable water applications since the 1960s, high-density polyethylene (HDPE) pipe has become the ideal material for piping systems used to transport drinking water.
What is Anodeless riser?
Anodeless risers are used by gas utilities to connect services lines to gas meter sets. Anodeless risers do not require cathodic protection. ECSI”s anodeless risers provide a safe and permanent connection to the gas meter and have a protective coating to resist corrosion and soil conditions.
What is ASTM D3350?
ASTM standard D3350 covers the identification of PE pipe and fitting materials in accordance with a cell classification system. Cell classification is based on tests of primary properties including density, melt index, flexural modulus and more.
What is ASTM D2239?
ASTM D2239 : Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter.
What are the ASTM d2513 specifications for gas pipes?
JM Eagle’s high-density polyethylene gas pipes are manu-factured in accordance with all applicable specifications including ASTM D2513, the standard specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings, and by reference meet the Department of Transportation Title 49, Part 192 “Transportation of Natural and Other Gas by Pipe Li…
What type of pipe is used for natural gas distillation?
Polyethylene gas pipes are the preferred natural gas distri-bution piping product of choice with over 90% usage in North America today. High-density polyethylene gas pipes are lightweight, non-corrosive, available in coil lengths, and easy to install by heat fusion or mechanical fittings.
Is HDPE pipe chemically inert?
JM Eagle’s black/yellow-striped HDPE pipe, for all practi-cal purposes, is chemically inert. It has good resistance to most solvents and chemicals that it is likely to encoun-ter in dry natural and manufactured gas distribution ser-vices. All HDPE pipe meets the chemical resistance specifications outlined in ASTM D2513.
Why choose polyethylene gas pipes?
Polyethylene gas pipes are the preferred natural gas distri- bution piping product of choice with over 90% usage in North America today. Polyethylene gas pipes are light- weight, non-corrosive, available in coil lengths, and easy to install by heat fusion or mechanical fittings.