How do I access APC PDU?
1. Select a serial port at the local computer, and disable any service which uses that port. 2. Use the supplied serial cable (APC part number 940-0144A) to connect the selected port to the serial port on the front panel of the Rack PDU.
What is PDU APC?
The standardized APC PDU is designed for increased manageability and efficiency of the server room. Through real-time remote load monitoring of connected equipment, an APC Metered Power Distribution Unit provides warning of potential power overloads before critical data center failures occur.
How configure APC PDU IP?
Antaira UTS-1110A single-port USB to RS-232] serial adapter. Photo by Antaira. By default, the APC AP7900 does not have an IP address assigned. The easiest way to configure an IP address is to log into the PDU over a serial port….Old Firmware.
| System IP | 10.20.2.1 |
|---|---|
| Subnet Mask | 255.255.0.0 |
| Default Gateway | 10.20.255.254 |
How do I access PDU?
Access a Metering Unit on the Network (Original PDU)
- Ask your network administrator for the IP address of the PDU metering unit.
- On a system connected to the network, type the metering unit IP address in a web browser’s address line to connect to the PDU metering unit.
- When prompted, log in as an admin or a user.
What is Switched Rack PDU?
Switched rack PDUs provide load metering combined with controlled on/off switching by individual outlets for remote power recycling, delayed power sequencing of equipment and outlet use management. This product can be configured as part of a complete Data Center or Server Room solution.
How do you set up a PDU?
Procedure
- Connect a DB9-to-RJ45 PDU communications cable from the RS232 port on the PDU to the serial (COM) connector on a monitor.
- A console window opens.
- Type the default user ID.
- When the console prompts you for a password, press Enter.
- When you are prompted to log in again, type the default user ID Admin .