How do I create a zone in Cisco MDS switch?

Posted on by Emilia Duggan

How do I create a zone in Cisco MDS switch?

Procedure

  1. Log on to the Cisco MDS switch.
  2. To start the configuration, type: switch-A# config terminal.
  3. To create or modify the zone set, type: switch-A(config)# zoneset name zoneset_name vsan vsan_id.
  4. To add members to the zone set, type: switch-A(config-zone)# member zone_name.

How do I configure zoning on a Cisco SAN switch?

Configuring zoning on a Cisco FC switch

  1. Clear the existing zones and zoneset if present.
  2. Obtain the switch worldwide name (WWN): show wwn switch.
  3. Configure the basic zone settings:
  4. Create storage zones and add the storage ports to it.
  5. Create an FCVI zone set and add the FCVI ports to it:
  6. Verify the zoning: show zone.

What is zoning in Cisco switch?

Zoning enables you to set up access control between storage devices or user groups. If you have administrator privileges in your fabric, you can create zones to increase network security and to prevent data loss or corruption. Zoning is enforced by examining the source-destination ID field.

What is Zone and Zoneset?

A zone set consists of one or more zones. A zone can be a member of more than one zone set and consists of multiple zone members. Members in a zone can access each other; members in different zones cannot access each other. Devices can belong to more than one zone.

What is FCalias and device alias?

FCalias is configured per VSAN. FCalias is propagated via distributing the full zoneset. Device alias is 1 PWWN. Device alias can be use for multiple functions like port security, IVR, and zoning. Device alias is not VSAN specific.

How do you zone a SAN switch?

How to zone a Brocade SAN switch in command line base?

  1. Plug in the FC Connector into an open port on the switch.
  2. Login to the server and verify the HBA connection.
  3. Check the Brocade Switch Port.
  4. Create the storage zones using the aliases on each switch.
  5. Add the zones to the fabrics on each switch.

What is a zone or zone set?

How do I add a device to Alias in Cisco MDS?

Step-1 – Define Device-Aliases

  1. SSH into the MDS A as “admin”
  2. Type “Configure Terminal”
  3. Type “device-alias database”
  4. Type “device-alias name pwwn ”
  5. Repeat for each new device you want to zone.
  6. Type “exit”
  7. Type “device-alias commit”
  8. Remember to do the same on MDS B.

How do I enable zoning on my brocade?

The basic steps to creating a zone on a Brocade switch are:

  1. Create aliases (optional, makes device management easier to read and administer) – alicreate.
  2. Create the zone – zonecreate.
  3. Create the zone configuration – cfgcreate.
  4. Enable the configuration – cfgenable.
  5. Save the configuration – cfgsave.

How do you delete a zone on a Cisco switch?

Cisco MDS – Clear All Zoning Configuration

  1. Firstly determine the names of the active zonesets for each vsan.
  2. Next you will need to deactivate the zoneset “vsan10_zs” on vsan 10:
  3. Remove the zonset “vsan10_zs” from the configuration:
  4. Clear all the zones from the database associated with vsan 10:

What is a Cisco zone?

Zoning enables you to set up access control between storage devices or user groups. If you have administrator privileges in your fabric, you can create zones to increase network security and to prevent data loss or corruption. Note. Devices that do not belong to a zone follow the policy of the default zone.

How to perform the zoning in Cisco MDS environment using command line interface?

Reference guide for performing the Zoning in CISCO MDS Environment by using Command Line Interface. In an existing setup, front end ports of VMax3 array (VMAX1234) are connected to 2 separate SAN Switches. FA ports 1D:04 and 2D:04 are connected SWITCH_A and 3D:04 and 4D:04 connected to SWITCH_B for reduncy on the fabric level.

Can Cisco switch zoning talk to each other?

This tutorial concludes our step by step guide to Cisco Switch Zoning and after completing all the above steps our hosts and storage devices should be able to talk to each other.

How do I create an alias in Cisco MDS San?

Tip As of Cisco MDS SAN-OS Release 1.3 (4), the Cisco SAN-OS software supports a maximum of 2048 aliases per VSAN. To create an alias using the fcalias command, follow these steps: Enters configuration mode. Configures an alias name (AliasSample).

How do I create a zone set with multiple zones?

To create a zone set to include several zones, follow these steps: Enters configuration mode. Configures a zone set called Zoneset1. Tip To activate a zone set, you must first create the zone and a zone set. Adds Zone1 as a member of the specified zone set (Zoneset1).