Is Macomber looms still in business?
passed away in January 2012, but MACOMBER LOOMS continues as a family owned business that includes a group of people dedicated to preserving a tradition of craftsmanship and innovation by manufacturing only those products which meet the quality standards set by Mr. Macomber in 1936.
What type of loom is a Macomber?
MACOMBER LOOMS Type_B_Folding_Looms. Our Type B floor looms, LARGE MACS, are designed and constructed as the most versatile of floor looms, capable of weaving the finest of fabrics and the heaviest of rugs.
What is a sectional beam in weaving?
Sectional Warp Beams allow you to beam a very long, very wide warp without assistance and is helpful for somewhat fine, somewhat fragile threads. Beaming sectionally is also useful when working with yarns that have twist energy in them.
How does a sectional warp beam work?
Sectional warping is dividing the warp beam into much smaller, even sections, and warping one at a time, like lots of tiny warps. So what have I found are the benefits to sectional warping using a sectional beam? Speed – I find that I can beam a single section at lightning speed.
How do you use a warp tension box?
Mount the counter on a table or stool and place it between the spool rack and the tension box. Thread one of the warp yarns through the counter according to the instructions supplied with the counter. As you wind the warp onto the beam, keep a firm tension on the counting yarn.
What is a warping wheel?
The Wheel adjusts from a circumference of two to three yards, allowing you to put on warps of up to 25 yards. With a built-in tensioning system, the AVL Warping Wheel will also save you from one time-consuming part of standard sectional warping: threading the tension box. You wind directly from the wheel onto the beam!
What is a jack type loom?
The jack loom shafts work independently from each other. The most common type of jack loom has jacks placed below the shafts. The shafts are pushed up when the jack is pulled by the treadle. This eliminates the need for the castle frame above the loom.
Why do sectionals warp?
In section warping, warp yarns are organized into yarn bands (sections), each having the same warp density as for the weaver’s beam. The warp yarns are wound onto the drum band by band until all yarns are wound onto the drum. Then, the yarn sheet is transferred from the drum onto the weaver’s beams.
What is sectional warping machine?
A sectional warping machine consists of three basic units, which are the creel, winding drum, and beaming unit. In section warping, warp yarns are organized into yarn bands (sections), each having the same warp density as for the weaver’s beam.
Why is sectional warping done?
If the density of warp yarns is very high, the beaming process has to be carried out in sectional warping, each consisting of a number of warp yarns (Fig. 2.49). The reason for this procedure is the dimension of the creel for a limited number of yarn bobbins.