What does error code F05 mean on a Indesit washing machine?
Waste pipe blockage
F05 — Waste pipe blockage or pump issue. Issue: Washing Machines door will not open / the door can be opened but water remains inside the drum. Advice: Please check for blockages in your pump filter (if applicable to model – please see user handbook).
How do I fix Hotpoint error code F05?
Fault: Hotpoint washing machine showing fault code: F05 = Waste pipe blockage or pump issue. Initial repair: Pull the grey ribbed pipe off of the spigot under the sink and place it in a bowl or bucket. Put the machine onto a spin/drain cycle and check to see if the water drains into the bucket or bowl.
What does F5 mean on a washing machine?
Did you receive a F5 E2 lid lock alert? The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area.
How do I fix F05 fault Indesit?
Indesit error F05 or F11
- Prepare a towel or a bucket.
- On the front side of the machine, open the hatch in front of the drain filter and unscrew the filter.
- Drain the excess water and collect it.
- Check if there’s a pin, coin or button in the drain and remove it.
- Clean and replace the drain filter.
How do I fix Indesit F05 error?
What does code F05 mean?
Waste pipe blockage or pump issue
F05 — Waste pipe blockage or pump issue. Issue: Washing Machines door will not open / the door can be opened but water remains inside the drum.
What is error F05 on my Indesit washing machine?
For electronic washing machines (the ones with electronic display) – error F05 is displayed. In the Indesit washing machines with knob control – program knob (program selection knob) rotates (turns) and the POWER / START indicator flashes 5 times with a pause.
How do I check the filter on my Indesit washing machine?
To check the drain filter, we find a small door or panel at the bottom of the Indesit washing machine and open it. Behind it you will see a cover that you need to carefully turn counterclockwise and pull it out by pulling it towards you.
Where is the pressure switch on an Indesit washing machine?
The pressure switch in the Indesit washing machine is located under the top cover of the washing machine, it is easy to remove, you just need to unscrew the two screws on the back of the case. On the side wall you will see a round part, from which there are two wires and one small hose.
What does F5 mean on Whirlpool washing machine?
Besides, what does f5 mean on washing machine? The F5 error code indicates that the Central Control Unit (main machine control board) detects a temperature sensor resistance that is out of the normal range. The F5 error is normally caused by a failed NTC temperature sensor. Secondly, what does f05 mean?