What is a medium pressure fitting?
Medium Pressure. Fittings and Tubing. Available components are elbows, tees, crosses, couplings, check valves and filters. Fittings and tubing used to complete flow system requirements. Applications.
What is the range of a medium pressure connectors?
Parker Autoclave’s medium pressure fitting components are capable of operating to 20,000 psi (1379 bar) and range in size from 1/4″ to 1-1/2″ tube size. Coned-and-threaded connection designed to permit larger bore sizes increased flow rates.
What is an autoclave valve?
Needle Valves. Parker Autoclave Engineers needle valves are designed for high pressure and temperature gas and liquid applications. Available in multiple tubing sizes with Vee or Regulating Stem and optional materials. These valves are used in markets such as water jet, water blast, chemical and oil and gas.
How does autoclave fitting work?
Cone shape is machined on the ends of the tubing and then a left-hand thread is applied to the outside of the tube. The collar is threaded onto the tube and the gland is used to push on the collar to make the seal.
How do you tighten an autoclave fitting?
Tighten gland “finger-tight”. Tighten gland with a wrench approximately 3/8 of a turn for a gas-tight seal. After frequent reassemblies, it may take less than 3/8 turn to effect a gas-tight seal, and as little as 1/8 of a turn may be sufficient.
What is a cone and thread fitting?
These fittings use a metal-to-metal seal with an interference fit. They do not not require an o-ring. In this design, a tube is forced into a coned surface. A collar is threaded onto the tube and a gland nut holds the sleeve and tubing against the coned surface.
How do autoclave fittings work?
What PSI is medium pressure steam?
For the purposes of this Standard, Medium Pressure Steam (MPS) refers to any systems operating between 75 psig – 16 psig, and Low Pressure Steam refers to systems operating at or below 15 psig.
How hot is medium pressure steam?
Steam above 50-psig (3.5 barg) but below 250-psig (17.5 barg) is termed as medium pressure steam.
What is the size of the medium pressure fitting on Parker?
Parker Autoclave’s medium pressure fitting components are capable of operating to 20,000 psi (1379 bar) and range in size from 1/4″ to 1-1/2″ tube size. FEATURES
What is the medium pressure for fittings?
Medium Pressure Fittings Medium Pressure to 20,000 psi (1379 bar) Elbows, Tees, Crosses, Straight and Bulkhead Couplings Since 1945 Parker Autoclave Engineers has designed and built premium quality valves, fittings and tubing.
What is the pressure rating for Parker autoclave fittings?
Fittings Elbows, Tees, Crosses, Couplings, and Bulkheads to 20,000 psi (1379 bar) Parker Autoclave’s medium pressure coned and threaded fittings for use with 1/4″ to 1-1/2″ tubing rated to 20,000 psi (1379 bar).
What is the working pressure of Parker valves?
Since 1945 Parker Autoclave Engineers has designed and built premium quality valves, fittings and tubing. Parker Autoclave’s medium pressure fitting components are capable of operating to 20,000 psi (1379 bar) and range in size from 1/4″ to 1-1/2″ tube size. FEATURES Working pressures to 20,000 psi (1379 bar)