What is network VSS?

What is network VSS?

A VSS is network system virtualization technology that pools multiple Cisco Catalyst 6500 Series Switches into one virtual switch, increasing operational efficiency, boosting nonstop communications, and scaling system bandwidth capacity to 1.4 Tbps.

What is a VSS port?

∎ [Streaming Port Settings] The VSS port enables GV-IP Camera, GV-Video Server or GV-Compact DVR to be connected to GV-System. The default setting is 10000.

How do I view Cisco VSS?

Verification. 1) To displays the virtual switch domain number, and the switch number and role for each of the switches you can use “show switch virtual” command. 3) To displays the role, switch number, and priority for each of the switch in the VSS use “show switch virtual role” command.

How does Cisco VSS work?

The Cisco Catalyst 6500 Series Virtual Switching System (VSS) allows the clustering of two or more physical chassis together into a single, logical entity. This technology allows for enhancements in all areas of network design, including high availability, scalability, management, and maintenance.

What are three benefits of implementing VSS in a network?

What are three benefits of implementing VSS in a network? (Choose three.) * VSS is implemented in the access layer which supports a more simplistic design. * VSS can logically combine up to 9 switches. To display configuration and status information for a VSS, which show command can be used?

What is VSL Cisco?

VSL is used to carry on proprietary encapsulated frames also control plane messages to form a single device, one supervisor the active one controls both chassis with second supervisor acting as hot standby as in a single chassis with two supervisors.

What is VSS in vmware?

VSphere Standard Switch (vSS) and vSphere Distributed Switch (vDS) provide network connectivity among virtual machines, different networks and workloads. You can use vSS and vDS at the same time, but not on the same networks or port groups.

What is the benefit of VSS?

VSS increases operational efficiency by simplifying the network, reducing switch management overhead by at least 50 percent. – Single configuration file and node to manage. Removes the need to configure redundant switches twice with identical policies.

How can I see my VSS status?

To check the VSS provider/writer status.

1. Open a command window.
2. At the command prompt, type vssadmin list providers, and then press ENTER.
3. Confirm that Microsoft VSS provider is listed as:
4. Type vssadmin list writers at the command prompt, and then press ENTER.
5. Confirm that all the VSS writers are showing:

What is VSL in VSS?

Virtual Switch Link For the two chassis of the VSS to act as one network element, they need to share control information and data traffic. The virtual switch link (VSL) is a special link that carries control and data traffic between the two chassis of a virtual switching system, as shown in Figure 4-3.

What is the difference between VPC and VSS?

3) VSS can support L3 port-channels across multiple chassis,however, vpc is used for L2 port-channels only. 4) VSS supports both PAgP and LACP,however, VPC only supports LACP. 5) VSS mainly used for campus environment whereas VPC is used for Data Center environment.

What is VSL link in VSS?

WHAT IS VSL: The virtual switch link (VSL) is a special link that carries control and data traffic between the two chassis of a VSS. The VSL is implemented as an Ether Channel with up to eight links.