What is the CNC CNC Plasma Cutter program?
This program is generally supplied by the tool manufacturer. In this manual, the Techno CNC Interface that is supplied with the CNC plasma cutter is used to control the machine. This is the program used to drive the torch manually, set the tool origin or offset and run the machine code to product the part.
How does a plasma cutter cut metal?
Because of its extreme heat, the Plasma effectively cuts through the metals and moves fast enough to blow molten metal from the cut part. Plasma cutting is a clean and fast method of cutting metals such as steel, copper, iron and aluminum of varying thickness.
How to drive the motor of the plasma cutting machine?
To drive the motor we use l298 dual full bridge to control of the motor at high power. P a g e | 33 fChapter 5 Computer Interface After discussing the mechanical design, the Plasma arc creation and the machine controlling, in this chapter the communication between the PC and the cutting machine is details.
Why plasma CNC machine is not used in Middle East?
Because of Plasma CNC Machine is new on industrial world and its research still going and facing hardly to get the research of it, at the time there is no application for it on Middle East for it. Finally we can design this new system, at high accuracy despite the difficulties.
Where are your CNC plasmas made?
Where are your CNC plasmas made? All ShopSabre CNC plasmas are 100% American made. From the engineering/development to welding, painting, wiring, and final testing and assembly, we truly are the manufacturer. We use only the finest quality materials and build all of our machines right here in the our facility in Elko, Minnesota.
What is a small CNC Plasma Table?
Let’s start with what we mean by small CNC plasma table. A small plasma table for metal cutting will range from 2′x2′ to 5′x10′, use an air plasma cutting system (as opposed to high-definition plasma cutting system) to cut, and a standard office computer as the CNC control.
How do I use the plasma settings in the techno CNC interface?
In the Techno CNC Interface, this is done through the Plasma Torch Controller. Click the Plasma Settings button to open the Plasma Torch Controller. 58. The Plasma Torch Controller is pictured below.
https://www.youtube.com/shorts/iGYAqSKvM1U