What setting should air exchanger be on in winter?
Set the control to the highest setting in warmer weather; lower the setting as the weather gets colder. In winter, set the dehumidistat just low enough to prevent condensation on windows.
Should I run my air exchanger in the winter?
Air exchangers should be run at all time, summer and winter. Depending on the size of your home, energy-efficient air exchangers can cycle through all the air in your home in just a few hours.
What setting should I have my air exchanger on?
You should therefore adjust the settings of your air exchanger by referring to the brand’s conditions of use. If possible, you should adjust the settings to switch to “recirculation” mode during the warm season. This effectively limits the entrance of moisture and lets the air circulate throughout the house.
What percentage should I set my air exchanger?
As a general rule of thumb, you should set your system’s dehumidistat to 25 percent to 50 percent depending on the temperature to keep condensation at bay. For instance, 50 percent is the maximum relative humidity you should have if the outdoor temperature is between -11 degrees Celsius to 18 degrees Celsius.
What is the lifespan of an air exchanger?
Like most other HVAC systems, an air exchanger can last as long as 15 to 25 years, depending on how well or badly it is used.
Do I need a dehumidifier if I have an air exchanger?
Do You Need a Dehumidifier If You Have An HRV? The answer is Yes, generally speaking. Just like we already stated, an HRV may not remove as much humidity as a dehumidifier. This is because a lot of heat and moisture exchanges take place depending on the season.
Should I turn off my air exchanger in the summer?
Pulling humid summer air into your home forces your air conditioner to work harder to compensate for it. As a result, your air conditioner will run longer and drive up your bills. As long as you’re using your air conditioner, consider switching off your air exchanger.
What is an air-to-air exchanger?
The majority of air-to-air exchangers installed in northern climates are heat recovery ventilators (HRVs). These units recover heat from exhausted air and return it to the building.
Why choose Elitaire for industrial HVAC?
At ElitAire, our ability to deliver energy efficient industrial HVAC is the result of strong manufacturing partnerships and engineering expertise. Where conventional firms simply offer a few products, we specialize in LEED certified, facility-wide solutions.
What is an air-to-air heat exchanger specification sheet?
The tests are used to generate an air-to-air heat exchanger specification sheet. This sheet normalizes exchangers to a given set of pressures and temperatures, enabling efficiencies and airflow rates to be compared across models.
How does an air exchange work?
At the core of the Air exchange there are small passage ways where the air gets warmed up with the stale air from inside the home. The stale air gets sent to the outside while the new air is sent to the inside.