What size air compressor do I need for a framing nailer?

What size air compressor do I need for a framing nailer?

This is the air flow or air volume that a compressor can supply – or its output. Many pneumatic power tools require a CFM of about 5, but it really varies. A pneumatic stapler might just need 0.3 CFM, while a framing nailer may require 2.2 CFM.

What angle is best for a framing nail gun?

30-Degree
30-Degree Framing Nailers The angle of the degree being the greatest, they provide the greatest access to tight angles in framing applications.

Which is better framing nailer 21 or 30?

30 degree paper collated framing nails come in strips of 34. With the standard magazine on both nailers they can only hold one strip. So the 30 degree certainly holds a bit more per load. Magazine Length / Overall Tool Size – The 30 degree nailer is more compact than the 21 degree version.

What pressure should I run my framing nailer?

2.4 CFM and 90-120 PSI air compressors are perfect for driving framing nailer. Most of the pneumatic framing nail guns require 2.4 CFM. Set air pressure 80-90PSI for firing 2″ nails, and set the regulator 100-125 PSI for 3.25″ nails.

Will a pancake air compressor run a framing nailer?

The answer is yes. The Porter-Cable C2002 Oil-Free UMC Pancake compressor delivers 2.6 SCFM and has maximum pressure of 150 psi. This is sufficient to operate framing nailers.

How much PSI do you need for a nail gun?

Most air tools require between 70 and 90 PSI. Any light-to-medium-duty air compressor can easily handle 90 PSI, but you always want the compressor to supply more flow than needed. Pro Tip: Always respect a PSI rating. If you don’t supply enough air volume, the tool won’t operate correctly.

Can I use 30 degree nails in a 34 degree nailer?

Often we hear the question: Can i use 30 degree nails in a 34 degree nailer? In our experience a 30 degree framing nailer will fire 34 degree framing nails successfully.