What would cause no spark on a snowmobile?
Disconnect the main electrical connector coming out of the engine, and then check for spark again. This unhooks the kill switch, ignition switch and wiring for those switches. If the spark improves, the problem is within wiring from one of those switches or a switch itself is to blame.
How do you test a CDI box on a snowmobile?
Ground the plug to the snowmobile’s frame and attempt to start the engine. If the spark plug gives out blue sparks, then it’s in good condition. If it gives out yellow sparks or no sparks, then the plug is bad.
What do you do if your snowmobile won’t start?
If there is gas in the tank, there are a few things you can try.
- Ensure Off Switch Isn’t Pushed In. Just like trying to start the engine with the tank on empty, it is possible that the off switch was inadvertently engaged.
- Swap Out the Gas.
- Check the Fuel Lines.
- Use Starting Fluid or Carb Cleaner.
- Worn-out piston rings.
What does CDI box do?
The short answer is, the CDI box controls your motorcycle’s ignition system—arguably one of the most essential systems on the bike. After all, if it doesn’t start correctly, your bike isn’t going anywhere.
How do I know if my stator is bad?
Insert each probe into a stator socket. You should read around 0.2 to 0.5 ohms. If you show an open circuit with the “Open” or infinity reading or have higher resistance, then the stator is bad and you must replace it. If these tests all produce positive results, then the stator itself is good.
How do I get a quote on a 2004 Ski-Doo skandic® wt 600?
If you would like to get a quote on a new 2004 Ski-Doo Skandic® WT 600 use our Build Your Own tool, or Compare this snowmobile to other Utility snowmobiles. To view more specifications, visit our Detailed Specifications.
Are there any problems with my Ski-Doo?
Even if you periodically service your Ski-Doo, problems may still occur. It’s always a headache when a fault code appears on the dashboard, especially if you are in the mountains!
Is there a spark in a skandic 500F?
Skandic 500F – no spark… We’ve got a 2002 Skandic 500F that’s decided to quit running. Last time out it worked fine, went to start it yesterday with no luck.
How do I know if my Ski Doo stator is bad?
If your Ski-Doo will not start and the battery and spark plugs all check out OK, there’s a chance the stator could be bad. The stator can be tested with a digital multimeter. Determine the stator resistance range for your model Ski-Doo.